Diels–Alder reactions of myrcene using intensified continuous-flow reactors

• Christian H. Hornung,
• Miguel Á. Álvarez-Diéguez,
• Thomas M. Kohl and
• John Tsanaktsidis

Beilstein J. Org. Chem. 2017, 13, 120–126, doi:10.3762/bjoc.13.15

• , intensified continuous processes inside tubular or plate-type flow reactors can successfully replace batch methodologies classically carried out in stirred glass vessels. We have demonstrated the benefits of this superior heat management in previous work looking at exothermic radical polymerizations in

Continuous-flow synthesis of primary amines: Metal-free reduction of aliphatic and aromatic nitro derivatives with trichlorosilane

• Riccardo Porta,
• Alessandra Puglisi,
• Giacomo Colombo,
• Sergio Rossi and
• Maurizio Benaglia

Beilstein J. Org. Chem. 2016, 12, 2614–2619, doi:10.3762/bjoc.12.257

• synthetically relevant intermediates (precursors of baclofen and boscalid). Keywords: chemoselectivity; continuous processes; flow synthesis; nitro reduction; trichlorosilane; Introduction The reduction of nitro compounds to amines is a fundamental transformation in organic synthesis. The nitration of

Effective immobilisation of a metathesis catalyst bearing an ammonium-tagged NHC ligand on various solid supports

• Krzysztof Skowerski,
• Jacek Białecki,
• Stefan J. Czarnocki,
• Karolina Żukowska and
• Karol Grela

Beilstein J. Org. Chem. 2016, 12, 5–15, doi:10.3762/bjoc.12.2

• (Figure 1) [5]. However, heterogenisation of these complexes was also extensively tested, as their applications in a solid form can be beneficial [6]. The efficient removal of ruthenium from metathesis products, possibility of catalyst recovery and reuse as well as their potential use in continuous

• processes are the main benefits of heterogeneous systems [7]. Unfortunately, their application is associated with some drawbacks. These catalysts usually exhibit lower activity than their homogeneous counterparts as reflected by a noticeably lower turnover frequency (TOF). Moreover, their synthesis, due to

Continuous formation of N-chloro-N,N-dialkylamine solutions in well-mixed meso-scale flow reactors

• A. John Blacker and
• Katherine E. Jolley

Beilstein J. Org. Chem. 2015, 11, 2408–2417, doi:10.3762/bjoc.11.262

• -BuOCl in situ for chloramine formation, applying the methodology to a broad range of substrates in high yields [20]. Published literature on chloramine formation is limited to batch procedures, however, the use of continuous processes could offer significant advantages. Use of continuous flow reactors

Continuous flow nitration in miniaturized devices

• Amol A. Kulkarni

Beilstein J. Org. Chem. 2014, 10, 405–424, doi:10.3762/bjoc.10.38

• of different nitroarenes (e.g. nitroglycerin, ethylene glycol dinitrate, diethylene glycol dinitrate, cyclotrimethylenetrinitramine, pentaerythritol tetranitrate, nitrocellulose, etc.). Continuous processes were enforced as they allowed to retain the same scale of operation while keeping the plant

• nitration of thioureas is based on subsequent nitrosation and nitration steps. The same group also analyzed continuous processes to perform the strongly exothermic nitration of naphthalene (47) (Scheme 14) with N2O5, both in the gas phase and in the liquid phase [49][50]. The authors reported that the

Investigating the continuous synthesis of a nicotinonitrile precursor to nevirapine

• Ashley R. Longstreet,
• Suzanne M. Opalka,
• Brian S. Campbell,
• B. Frank Gupton and
• D. Tyler McQuade

Beilstein J. Org. Chem. 2013, 9, 2570–2578, doi:10.3762/bjoc.9.292

• , we chose to employ a solid basic reagent that would simultaneously catalyze the Knoevenagel reaction and confine the reagent to the first step, as well as a solid desiccant to remove the water. Previously we have used solid catalysts and/or solid reagents in a number of continuous processes [41][42

[3 + 2]-Cycloadditions of nitrile ylides after photoactivation of vinyl azides under flow conditions

• Stephan Cludius-Brandt,
• Lukas Kupracz and
• Andreas Kirschning

Beilstein J. Org. Chem. 2013, 9, 1745–1750, doi:10.3762/bjoc.9.201

• refer to [6][7][8][9][10][11][12][13][14][15]. Recently, the Seeberger group has published a flow protocol on the photochemical degradation of aryl azides and the subsequent formation of 3H-azepinones [16]. With the emergence of continuous processes involving miniaturized flow reactors in organic

Chemistry in flow systems III

• Andreas Kirschning

Beilstein J. Org. Chem. 2013, 9, 1696–1697, doi:10.3762/bjoc.9.193

• chemical synthesis in the laboratory from a classical batch approach to continuous processes by using micro- and miniaturized flow reactors. In the past two decades this technology has seen a dramatic increase of visibility. Considering an analyses of the accompanied developments in flow synthesis one has

• reactors, mixers and interfaces for the online monitoring of continuous processes. The major inspiration came from the process and development units in the chemical industry, where continuously operated pilot plants already played a key role. Conceptually, highly modular microreaction systems developed by

Coupled chemo(enzymatic) reactions in continuous flow

• Ruslan Yuryev,
• Simon Strompen and
• Andreas Liese

Beilstein J. Org. Chem. 2011, 7, 1449–1467, doi:10.3762/bjoc.7.169

• stability. The multistep microbial biotransformations are also feasible for the continuous processes that do not require cofactor regeneration. Nöthe and coworkers developed a whole-cell membrane reactor operated in CSTR mode, with continuous product removal by ultrafiltration, for the microbial conversion